You bought the guide, downloaded the files, and now a dead battery sits on your garage floor. What do you actually do first, and in what order, so you do not waste a weekend or hurt yourself?
This walkthrough covers how to use the EZ Battery Reconditioning system: what the course gives you, the tools to gather, the process in the order the guide teaches it, and the safety rules that matter. Facts below come from the manufacturer's program details and independent reviews.

What the Course Gives You
According to the manufacturer, EZ Battery Reconditioning is a digital product: a PDF manual and video lessons covering lead-acid car and truck batteries, golf cart and marine batteries, solar storage batteries, NiCad and NiMH packs, and, in newer materials, lithium-ion and EV or hybrid modules. The course opens with safety rules, then teaches how to test a battery to decide whether it is worth reconditioning at all. Do not skip that testing chapter: not every dead battery can be saved, and the guide tells you how to spot the lost causes (cracked cases, bulging sides, voltage readings far outside the workable range).
The Tools You Need on Your Bench
Gather everything before you touch a battery. Per the course materials, the list is short and most items are cheap or already in a garage:
- Digital multimeter (about $10 to $15): reads voltage before and after, so you know whether the battery is a candidate and whether the process worked.
- Hydrometer (about $10): measures acid density in each cell of a flooded lead-acid battery.
- Battery charger: a standard charger, ideally with a slow trickle or desulfation mode.
- Safety gear: goggles, chemical-resistant gloves, and ideally an apron. Not optional.
- Baking soda (at least a pound): neutralizes acid spills and cleans corrosion.
- Distilled water: for topping up cells and mixing cleaning solutions. Not tap water.
- Epsom salt: used in the chemical solution step described in the guide.
- Funnel, flathead screwdriver, steel wool or wire brush, plastic buckets, rags: for cell caps, terminals, and safe liquid handling.

How to Use It: The Process Step by Step
The steps below are the general procedure described in the course materials and third-party walkthroughs of the program, summarized in my own words. For exact measurements, charge settings, and timing, follow the manual itself.
Step 1: Set up the workspace and gear up. Work in a ventilated area such as a garage or driveway, never a closed room. Goggles and gloves go on first. Keep sparks, cigarettes, and open flames away, and keep children and pets out.
Step 2: Disconnect and remove the battery. Turn off the device or vehicle, disconnect the cables (negative terminal first), and move it to your work area.
Step 3: Clean the battery. Wipe the case and scrub corrosion off the terminals with steel wool or a wire brush. A baking soda and water paste neutralizes acid residue. Dirty terminals alone can cause weak readings.
Step 4: Test whether the battery is worth saving. Read the resting voltage with the multimeter. A 12V battery between roughly 10V and 12.6V is a possible candidate; far outside it, the battery is usually too far gone. On flooded batteries, check each cell with the hydrometer.
Step 5: Run the desulfation treatment. The course teaches two approaches for lead-acid batteries: controlled equalization charging, which breaks down lead sulfate crystals with a specific charge profile, and a chemical additive method using a distilled water and Epsom salt solution, followed by neutralization. Follow the manual's order and quantities exactly.
Step 6: Slow-charge it, fully. Put the battery on the trickle charger and let it run the full cycle. A proper desulfating charge takes 12 to 24 hours, and a battery pulled off early has not finished the process.
Step 7: Retest and reinstall. Check the voltage again against your before-reading. If the numbers improved and the cells are balancing out, reinstall the battery and reconnect the cables. If nothing changed, the battery was likely past saving.

Which Batteries This Works On, and Which to Skip
Match the battery to the right module first. Flooded lead-acid car, truck, and RV batteries are the primary focus and the easiest starting point, since you can access the cells directly. Golf cart and marine deep-cycle batteries are also a strong fit, and reviving a set of them brings the biggest savings. NiCad and NiMH packs get their own section on the memory effect.
Lithium-ion and EV or hybrid modules appear in the newer materials with dedicated safety protocols: treat those as advanced reading, since lithium cells can catch fire if punctured or shorted. Skip batteries with cracked or bulging cases, batteries that leak, and any battery reading far outside the workable voltage range.
The Safety Rules That Matter Most
Lead-acid batteries contain sulfuric acid and release hydrogen gas while charging. Acid burns skin and eyes, and hydrogen can ignite near a spark or flame. The non-negotiables: goggles and gloves on before anything else, ventilation during charging, no sparks or flames near the workspace, baking soda and clean water within reach, and immediate flushing with plenty of water for any acid contact.

Pros and Cons
Pros:
- Clear step order: safety first, then testing, then treatment, then charging
- Cheap tool list: most items cost under $15 each
- Covers many battery types in dedicated modules, from car to solar to power tool packs
- One-time $47 price with a 60-day money-back guarantee through ClickBank
- Real savings potential: one revived battery can cover the course price several times over
Cons:
- Real hazards: acid, hydrogen gas, and electric shock make the safety gear mandatory
- Slow by design: desulfating charge cycles run 12 to 24 hours
- Not every battery is salvageable; cracked, bulging, or fully sulfated units may not respond
- Lithium modules are advanced territory with fire risk if mishandled
- Sold only through the official site; free copies online are pirated and outdated
Frequently Asked Questions
Do I need to be an electrician or mechanic?
According to the manufacturer, no. The course is written for beginners and walks through multimeter readings, testing, and charging in order. If you can follow a recipe with measurements, you can follow this.
How long does it take to recondition one battery?
The hands-on work takes under an hour. The charging cycle is the slow part: 12 to 24 hours. Do not plan this as a same-day fix.
Which batteries give the best results?
Flooded lead-acid batteries are the easiest starting point, and deep-cycle golf cart and marine batteries respond well too.
Is battery reconditioning safe?
It is safe when the rules are followed: ventilated workspace, goggles and gloves, no sparks or flames nearby, children and pets kept away.
How much money can I actually save?
New car batteries commonly cost well over $100 each, so reviving even one can cover the $47 course price several times over, and the 60-day guarantee is the backstop.
Final Verdict
EZ Battery Reconditioning earns its place for a specific buyer: someone with a garage or driveway, basic tools, and the patience to follow the process with the safety steps taken seriously. For that person, $47 with a 60-day guarantee is a fair price.
If you want instant results, will not wear safety gear, or only own batteries the testing chapter tells you to skip, the honest answer is to pass. For everyone else: test first, treat second, charge fully, and let the multimeter tell you the truth.
More honest reviews from USA Deal Guide
Affiliate Disclosure: Some links on this page are affiliate links. If you purchase through these links, we may earn a commission at no additional cost to you.